Parameters Tested

pH - range 6.5 - 8.4 pH
Chlorine (free/combined/total) - range 0.0 - 6.0 mg/l (ppm)
Alkalinity (Acid Capacity) - range 0 - 300 mg/l (ppm) CaCO3
Cyanuric Acid (Stabilizer) - range 0 - 160 mg/l (ppm)
Active Oxygen (Monopersulphate) - range 0.0 - 30.0 mg/l (ppm)*
Bromine - range 0.0 - 13.5 mg/l (ppm)**
Chlorine Dioxide - range 0.0 - 11.4 mg/l (ppm)**
Ozone - range 0.0 - 4.0 mg/l (ppm)**
Hydrogen Peroxide - range 0.0 - 2.9 mg/l (ppm)*

*requires reagent tablets not included in basic kit
**requires Glycine reagent tablets if chlorine is present. Glycine reagent tablets are not included in the basic kit

Product Codes

POL01: PoolLab Photometer Kit (with startup reagent supply)
POLsp-kv: Replacement Vial
POLsp-str: Plastic Stir Rod
POLsp-ls: Rubber Light Shield
POLsp-box: PoolLab Carry Case

TbsPD1-100: DPD 1 (100 tablets)
TbsPD3-100: DPD 3 (100 tablets)
TBsPpH-100: Phenol Red (100 tablets)
TbsPTA-100: Alkalinity (100 tablets)
TbsPCAT-100: CYA (100 tablets)

Extra Parameters:

TbsPD4-100: DPD4 for MPS Test (100 tablets)
TbsHGC-100: Glycine Tablets for Chlorine Dioxide (100 tablets)
TbsPHP-100: Hydrogen Peroxide (100 tablets)

PoolLab

The new PoolLab® 1.0 is a single wavelength photometer for professional water analysis of pools and spas.

An in-built but changeable cuvette allows quick water sampling by just dipping in the IP67 waterproof PoolLab®.

PoolLab® with its 6 buttons is designed for instant access to the parameters installed, which are: pH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer). Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone and Hydrogen Peroxide.

As PoolLab® uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management.
Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.

A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.

PrimeLab 2.0

New and improved for 2021.  This next generation photometer has the capability for more than 140 different water testing parameters with only one machine. It has with a wide array of accuracy across 18 wavelengths (410 – 940 nm) from a single light source and an advanced multi-spectral sensor. The excellent accuracy of the sensor even allows self-calibration of the system at the press of a button. Standardised reference solutions are also available to confirm accuracy.

5.5’’ colour-touch-HD-display

pH/ORP Electrode Connection Option (connects to common pool chemical controller probes/sensors)

Rchargeable 8,400 mA Li-Io-battery

Bluetooth, WiFi and USB to directly communicate with the free LabCOM software, app and cloud

QR-scanning camera to recognise reagents

Enhanced admin setup via LabCOM allows remote validation of water quality parameters with a tafflic light system for warnings/promts on necessary chemical adjustments

Default reagents are stable long life tablets but liquid reagents can be substituted for faster testing

HydroQuant Photometric Test Kit

The HydroQuant test kits by WAPOTEC are the most powerful portable test kits available to pool operators.  The HydroQuant 701 tests all 6 standard parameters plus chlorine dioxide (oxidizer) and aluminum (to ensure proper flocculation).    This kit is very accurate, and easy to use.  It can be easily cleaned & calibrated for a long service life.