Clog Free
Clog Free reduces the maintenance and troubleshooting on chlorine & soda ash pumps. It helps to dissolve alkaline deposits in the feed lines to keep your pumps running smooth.
Note: Clog Free works best in our experience by pumping is through the chlorine pump full strength once a month instead of mixing it in the chlorine tank
Soda Ash Feeders: add 250 ml of Tabex Clog Free per 50 Litres of water in the chemical storage tank. Always add Clog Free to storage tank full of water and mix thoroughly before adding Soda Ash to solution.
Clog Free reduces the maintenance and troubleshooting on chlorine & soda ash pumps. It helps to dissolve alkaline deposits in the feed lines to keep your pumps running smooth.
Foam Gone is an effective de-foamer designed for use in whirlpools. In some circumstances, the product is also effective in swimming pools.
Grime Away is a specially formulated blend of acids designed to solve the unique cleaning problems in and around pools & hot tubs. Removes grease, grime, dirt and scale from vinyl liners, tile, fiberglass and concrete pool surfaces.
Filter Flo is a concentrated, granular cleaner designed for degreasing and descaling all types of pool/whirlpool filters. This product helps eliminate short filter runs, poor water quality, high chlorine demand and the potential for microbiological contamination.
Lectra Clean is a liquid product that is formulated to quickly dissolve scale, oils and organic debris from the blades of electrolytic salt water chlorinator cells.
Shock ‘N Soak is an effective oxidizer for whirlpools and is specially formulated for hot water (38º-40ºC) conditions. When present in the water it will oxidize bather waste that would normally react with chlorine to create unhealthy and irritating combined chlorine.
LectraClor is a fine, granulated salt that is free of impurities & is compatible with swimming pool/hot tub water. LectraClor is used to increase sodium chloride (NaCl) in pools that have salt water chlorine generators. The inert salt is turned into chlorine for disinfection and back to salt after the process is complete.
For outdoor pools, see LectraClor Plus.
Depending on your source water condition and other water saturation index values it may be necessary to raise the calcium hardness of your pool/hot tub water.
Maintaining pool/hot tub alkalinity at 100-120 mg/L (ppm) is an essential and often overlooked part of preventing water chemistry problems. Low alkalinity will contribute to corrosive water conditions and make it difficult to achieve a consistent pH.
Shock ‘N Swim is an effective oxidizer for swimming pools and therapy/teach pools. When present in the water it will oxidize bather waste that would normally react with chlorine to create unhealthy and irritating combined chlorine. When used regularly, Shock ‘N Swim will reduce chlorine demand and reduce consumption of chlorine & associated balancing products.
See our handout, “Combined Confusion” for more information on dealing with combined chlorine issues.
A safer alternative to using hydrochloric acid to lower pH.
A safer alternative to using hydrochloric acid to lower pH. pH down is a dry acid (sodium bisulphate) that lowers the pH and total alkalinity of water.
Klear Floc is a concentrated flocculent that improves filtration and reduces the organic contamination of the water. It accomplishes this by binding fine, suspended particles into larger masses that the filter can remove from the water.
The same concentrated water clarifying properties as Clear It with the added capacity to break down oils and other impurities that are present in hot tubs/whirlpools.
Clear It is a highly concentrated pool water clarifier that coagulates fine suspended solids that are normally too small to be trapped by the filter. It is effective with any type of filtration system, and if it is used regularly, Clear It will reduce chlorine demand and improve water clarity.
UV light from the sun will make quick work of the free chlorine in your outdoor pool water unless it is stabilized. Tabex Stabilizer is 100% isocyanuric acid (CYA), and when maintained at a level of 20-30 mg/L of water in an outdoor facility, it will effectively reduce chlorine consumption due to sunlight, while still allowing chlorine to be an effective disinfectant.
Ultra Pool Secure is our most concentrated and fastest acting product for removing existing metal stains.
Spa Secure has all the same powerful stain and scale prevention properties as Pool Secure but it is formulated to be more effective in hot water.
Protect your pool basin and equipment from from metal staining and scale formation. Pool Secure is a sequestering agent that allows the water to hold onto more calcium to prevent the symptoms associated with hard water. It also prevents staining of pool surfaces that is caused by the oxidation of dissolved metals such as iron, copper and manganese. For existing stain removal, see Ultra Pool Secure. For warm water use, see Spa Secure.
Algysolve 60% is a highly concentrated extra strength algae killer. It is a key part in our algae removal process.
Algysolve 2250 is our high performance preventative algaecide. Think of it as an insurance policy against time consuming and unslightly algae growth.
pH Up effectively raises pH in swimming pool and whirlpool water. The chemical name of the product is Sodium Carbonate.
Stabilized Chlorine Tablets are designed to be used in outdoor applications. The Alberta Health Act prohibits the use of stabilized chlorine products in public/semi-public swimming pools.
Blast is an unstabilized granular chlorine.
This product is no longer available. If you need a recommendation for an alternate chlorine shock, please call our office.
Stabilized Chlorine Granules are designed to be used in outdoor applications. The Alberta Health Act prohibits the use of stabilized chlorine products in public/semi-public swimming pools.