This top quality sea serpent is the best pool noodle going. Manufactured from EVA foam it is as durable as ever! The design of our serpent is round (2.75″) diameter and therefore more comfortable to use and is available 2-colored striped: red/white, blue/white, green/white and yellow/white. Stocked in 60″ lengths, available in shorter 48″ length on request. This product is sold individually, assorted colors only.
The Line Slider will provide an easy, safe, and fast way to remove your racing lane lines every time they are reeled from your pool while at the same time protecting the racing lane line from catching and banging against the pool edge. Installs quickly on the pool deck, the Line Slider will protect and prolong the life of your racing lane lines.
Product Specifications:
– Can be used with cables that are made with 4” or 6” segments
– Made of very resistant and durable fiberglass – Flexible PVC trim on the edges
– Integrated handle for easy portability
– Works with profiles that have a lip on the deck
– Easy to use
– Stackable therefore we can ship 5 stacked in one box for savings on freight
– Underside is white as well
– Great design and look
– Dimensions: 23” long x 16” wide x 20” high (overall) / Height over deck is 8”
– Weight : 6 lbs
The Racing Lane lines’ flow-through design controls water turbulence by allowing wave energy to be dispersed and channelled along the lane. Each lane consists of a series of polyethylene disks and donuts. Both the 10-cm (4″) disk and the 15-cm (6″) disk lanes meet all FINA standards and are available with tensioner or ratchet reel. Each disk is designed to rotate independently of the others, thus allowing wave energy to be absorbed and dispersed along the lane. This wave reduction optimizes pool conditions for training and competition. The racing lanes are available in a 6 colours (red, blue, white, green, yellow, and black) and are shipped fully assembled with a vinyl-coated stainless-steel cable.
Available in 25M, 50M and custom lengths
A revolutionary product, the “World 2005” floating water polo goal is the BEST on the market. After an in-depth analysis of the water polo world’s needs, we feel that the “World 2005” is an innovative and unique goal that will meet those needs. The following are a few unique features that make this floating water polo goal stand out from all others on the market:
– 6” thick fibreglass floaters allow for better balance. The “World 2005” floats better than any other goal. There is NO tendency to tip forward.
– the unique two-float design allows goalies to kick freely because there is nothing to obstruct their kicks.
– floaters are dark blue therefore providing better contrast, for the goalies, from the white frame.
– fibreglass will NOT chip on the bottom edge of the goal because a protective strip has been incorporated along the edge, therefore prolonging the life of your goal.
– foot pads have been installed under floaters so when your goal is sitting on the deck, it is actually sitting on the pads and NOT the fibreglass floaters, once again prolonging the life of your goal.
– only the best EVA foam was used inside the floaters to AVOID deterioration.
– the foam will NOT float away from the goal like others on the market because we have permanently fixed the foam to the fibreglass floaters.
– handles are placed on either side of the goals to facilitate displacement of the goal.
We have highlighted just a few features that make the “World 2005” the BEST floating water polo goal available as well as why it was used at the XI FINA WORLD CHAMPIONSHIPS in Montreal in July 2005.
New from Nordesco Industries! The deluxe and standard pool racing lane storage reels both have the same impressive lane storage capacity. The Deluxe model features blue polyethylene disks on the end reels to prevent lane lines from spilling/catching in addition to a convenient push/pull handle.
Both models are constructed from 100% stainless steel – powder coated with a sparkle silver finish. Stainless steel castors with brakes are also featured on both models.
Capacity: 8 x 25M Lanes (4″ Disc) or 4 x 25M Lanes (6″ Disc)
Dimensions: 82.75″ Long x 46.75″ Wide x 56.75″ Tall
Deluxe model pictured – disc color may vary from image shown
Our aqua step is a very stable step used for aquatic exercise. It can be used in or out of the water. It has an anti-slip surface and is made of high impact plastic. The height can be adjusted to 5.5 inches or 7.5 inches. The weight is approximately 30lbs.
Dimensions: 24″ Lx 16″ W
The ball release is used for the start of play of water polo matches. Retained on the half distance line, the ball is put into play when the ball release is submerged by pulling the rope from the side of the pool, allowing for fair and accurate starts every time. Manufactured from high density plastic and stainless steel, it is designed to hold both men and women water polo balls. In order to use this release system, two eyebolts need to be installed at the bottom of the pool. (Eyebolts and water polo ball not included.)
45.8150: Water polo ball release
Made from neoprene, our gloves are comfortable and durable. They fit nicely and are equipped with a side zipper. Its webbed design allows for an intense water resistance workout.
Sold per pair.
NO LONGER AVAILABLE
The Aquafitness Belt is made of molded EVA foam and is designed to offer superior comfort and buoyancy. Its 3D ergonomic shape molds to the body and supports the moving swimmer in position, allowing for full concentration on the workout. Available in 3 sizes, this belt can be used for cardiovascular and muscular exercises at variable intensity. It is also practical for rehabilitation following leg or back injuries. For a more complete workout, use it with the AquaDisk.
The Nordesco AquaDisk is a training tool that uses water resistance for the workout. Made of EVA molded foam, the ergonomic design of the grip insures a safe workout without putting stress on the shoulders. The AquaDisk can be used in a wide variety of exercises for the arms and shoulders. Two sizes available and sold per pair.
Ideal for rugged environments, this model features plastic that has a higher impact resistance as well as a deluxe towline made from a softer, supple material that is highly visible due to it being yellow in color. It features textured plastic at all handle areas and an ergonomic design with streamline point.
Manufactured from high quality plastic, and red in color, it features textured plastic at all handle areas and an ergonomic design with streamline point.
This is a multi-functional product that can be used at water parks and for lake, beach or pool rescues. It can be used for towing a victim, supporting the rescuer, or handed to a victim for assistance. Made from molded EVA foam, our rescue tube features reinforced ends, polypropylene cord, a 2” shoulder strap equipped with a stainless steel snap hook, two stainless steel O-rings, and LIFEGUARD logo embossed in the foam on both sides. It is a vibrant yellow, therefore very visible and all of its features make for a very durable product.
Dimensions: 39″ long x 6″ wide x 3″ thick.
A 20 lb diving brick is required during qualifying and re-qualifying of National Lifeguard exams all over Canada. Our small diving brick is easy to pick up and carry. A 10 lb brick is also available.
An extremely popular product, these indication panels will direct swimmers to the lane where they will be able to swim at their own pace. Three speeds are available: slow, medium and fast. A “closed” sign is also available for your lanes as well as your diving boards. The panels measure 12″ x 18″, and are made entirely of very resistant plastic.
Manufactured from high-density plastic, these durable brackets store racing lane lines by placing them at intervals (approx. 12ft.) along your pool wall.
For those who have limited deck space, it is now possible to install, at the point of construction, stainless steel traps in order to store your racing lanes in the basement
Our new Line Slider will provide an easy, safe, and fast way to remove your racing lane lines every time they are reeled from your pool while at the same time protecting the racing lane line from catching and banging against the pool edge. Installs quickly on the pool deck, the Line Slider will protect and prolong the life of your racing lane lines.
Product Specifications:
– Can be used with lines that are made with 4” or 6” disc segments
– Made of very resistant and durable fiberglass – Flexible PVC trim on the edges
– Integrated handle for easy portability
– Works with profiles that have a lip on the deck
– Easy to use
– Stackable
– Underside is white as well
– Great design and look
– Dimensions: 23” long x 16” wide x 20” high (overall) / Height over deck is 8”
– Weight : 6 lbs
Manufactured from PVC, a high-density plastic base, & non-marking swivel castors, this unit was designed specifically to store the Dolphin floating seat. It can store up to 14 seatss.
Dimensions: 64″ long x 30″ wide x 39 3/8″ high
This wall-mounted unit keeps kickboards and pull buoys neatly arranged on the pool deck or in the equipment room. If placed strategically, this unit will allow swimmers to get in the habit of putting away their own equipment. Made of high-density plastic, they both have a storage capacity of approximately 25 to 30 units.
Innovative, durable, and most important, safe, are the three perfect words one can use to describe the teaching platform. Our teaching platform was designed with instructors to meet the needs of aquatic professionals. We are proud to say that this product surpasses all that is on the market today. With features that promote safety, stability, and versatility.
This 4ft x 4ft teaching platform has a large surface area. The legs height can be adjusted to 16″, 18″, 20″ or 22″, which increases the accessibility of deeper pools as well as diversify the programs available for swimmers. For increased security the teaching platform is equipped with a plastic protective grill reducing the risk of anyone swimming under the platform and getting stuck. It is made from a 100% stainless steel frame and plastic top allowing for frequent use over the years to come.
One teaching platform consists of the following:
4 Ft x 4Ft with 2 white PVC rails included.
Weight: 80 lbs
Our regular pull buoys are made of ethafoam and equipped with an adjustable strap. Just the right amount of flotation allows for a great stroke correction. Deluxe buoys are made from high quality EVA foam for greater comfort and durability.
Our shower curtains are made of thick vinyl reinforced by an inner layer of non-tear polyester netting. Brass grommets prevent hooks from ripping the curtain.
This item was developed by aquatic fitness professionals, and uses the principles of water resistance to tone the muscles of the upper body. It is offered in 2 strengths: “regular” for beginners, and “advanced” with extray buoyancy for more of a challenge.
Sold per pair or in cases of 12 pairs per style.
Extremely popular, having the water walkway in the pool ensures hours of fun! It is the perfect solution for free-swim time, birthday parties, special events, day camps, and especially Spring break activities. Completely redesigned, the water walkway is now made from the highest quality EVA foam and it is now lighter and more durable than its predecessor. This product must be installed in a minimum of 4-feet water depth. The colors may differ from one shown, and there is no assembly required.
Dimensions: 28 ft long x 3 ft wide
Our unique and popular play rafts are loved by all! The mats are made from a specially formulated EVA foam and we are proud to say that our mats are the best in the industry due to their durability. Great for fun time as well as educational purposes. All models are available in vibrant blue, red, yellow, green, orange and lime green.
Color choices can be requested.
We have taken the concept of a bench and combined it with storage capabilities to offer you the hide-away bench. Made to last, this bench is manufactured using high-density plastic, pneumatic support arms for the lid and an anodized aluminum frame that is equipped with rubber stoppers to protect your deck. Not only is the hide-away bench durable, it is also solid and practical. Just close the lid and you have a spot where parents can sit and watch their child’s class. Place the bench along the wall and use it for the two functions for which it was created: storage and seating.
Dimensions: 8′ long x 16″ wide x 17″ high
Weight: 113lbs
We have designed a bench complete with backrest. This bench can be placed anywhere on the pool deck or in the change rooms and persons of all ages can be comfortable sitting down and having that extra back support due to the backrest. Made from 100% recycled plastic and equipped with stainless steel hardware allows for a hygienic and durable product that will last for years to come. The wide legs allow for a stable bench where anchoring is not necessary, however, is always a possibility depending on your needs. The legs are pre-assembled; however assembly is required for the rest of the bench.
This product carries a 10-year warranty.
Dimensions: 72″ long x 16 1/2″ high
This bench has known increasing popularity over the years, thanks to its dependable design and unfailing sturdiness. It is made entirely out of recycled materials, with stainless steel hardware, and will prove its usefulness either on the pool deck or in the change rooms, no one will be disappointed! It is available in several standard lengths, the six-foot bench is usually in stock; other lengths require two-week delivery time. Some assembly is required.
This product comes with a 10-year warranty. Custom lengths available from 2’ to 12’.
Dimensions: 15 1/2” wide x 16 1/2” high
This wall-mounted bench is made out of recycled plastic, with black powder-coated steel mounting brackets, and stainless steel hardware making it a durable, sturdy product, ideal for installation on the pool deck or in the change rooms. The benches can be installed end to end, and also made for corner fitting, so they can placed all around a room (extra costs for this option), regardless of its dimensions. It is available in several standard lengths, the six-foot bench is usually in stock; other lengths require two-week delivery time. Some assembly is required.
This product comes with a 10-year warranty. Custom lengths available from 2’ to 12’. Anchors are not included.
Dimensions : 16” wide x 13 1/2” high
Entirely crafted from recycled materials, with stainless steel hardware, this plastic bench is both solid and durable; in fact, it’s almost indestructible! Its durability makes it a perfect choice for the pool deck or the change rooms. It is not as wide, nor as high as our Wide Plastic Bench however it can accommodate adults, but it was initially designed specifically for young children. The six-foot bench is usually in stock; other lengths require two-week delivery time. Some assembly is required.
This product comes with a 10-year warranty. Available ONLY in lengths shown below, no custom lengths available.
Dimensions: 10 7/8″ wide x 14 1/2″ high